Before you issue an RFQ for a high frequency MPPT solar inverter or compare battery-ready options across an inverter charger range, use this page to check the specifications that affect uptime, installation cost, and long-term serviceability.
Use this supplier due-diligence checklist to move from marketing claims to concrete RFQ questions. Each line pairs the buyer question with the HP-PV Series answer.
Question: Will protected loads stay online during a grid interruption? HP-PV answer: 10ms in UPS/VDE4105 mode and 20ms in APL mode.
Question: Can the unit match a 24V or 48V battery bank? HP-PV answer: Normal battery system voltage is selectable at 24VDC or 48VDC depending on model.
Question: Can the inverter run in daylight-only sites without storage? HP-PV answer: Yes — the official product page states the inverter runs without battery.
Question: Is the solar charge controller internal or an added cost? HP-PV answer: A built-in 120A–160A MPPT solar charger is included, with MPPT efficiency up to 99.9%.
Question: Can the unit prevent reverse power flow where required? HP-PV answer: The product feature list includes an anti-backflow grid connection function.
Question: Can distributed sites be managed remotely? HP-PV answer: WiFi/GPRS remote monitoring is listed, with optional RJ11/RJ45/RS232/485 management interfaces.
HP-PV high-frequency hybrid inverter hardware shown in the official product gallery.
The HP-PV Series is an off-grid high-frequency hybrid inverter line aimed at residential smart-home installations and remote or harsh-environment sites. Review the core parameters below before mapping the product to your load profile and battery architecture.
| Series name | HP-PV Series 3.6kW-10.2kW off-grid high frequency hybrid inverter |
|---|---|
| Model numbers | HET-HP-PV1600W, HET-HP-PV2400W, HET-HP-PV3600W, HET-HP-PV5600W, HET-HP-PV10000W |
| Battery system voltage | Selectable 24VDC / 48VDC systems |
| Output waveform | Pure sine wave; AC voltage regulation 230VAC ±5% in battery mode |
| Transfer time | 10ms (UPS / VDE4105) / 20ms (APL) |
| Inverter efficiency | Peak inverter efficiency >92%; MPPT efficiency up to 99.9% |
| MPPT solar charger | Built-in 120A–160A MPPT solar charger controller |
| PV array range | MPPT voltage ranges 10–120VDC / 10–150VDC / 120–450VDC by model; max PV open-circuit voltage up to 500VDC |
| Battery charging | 3-step charging for flooded, AGM/GEL/lead batteries; 4-step charging for lithium batteries |
| Remote management | WiFi/GPRS remote monitoring; optional RJ11/RJ45/RS232/485 |
| Operating environment | -15°C to 55°C operating; 5%–95% relative humidity, non-condensing |
| Certification / warranty | CE (IEC62109-1,2), EN61000-6-1, EN61000-6-3; 2-year warranty |
Every deployment context creates a different question list. These four scenarios show where the HP-PV Series features become buyer requirements.
For a home with lighting, routers, refrigeration and entertainment loads, the buyer decision is continuity.
Ask for10ms UPS/VDE4105 transfer, pure sine wave output, and a battery voltage that matches the existing 24V or 48V bank.
Some installations only need solar power while the sun is available and do not justify battery spend.
Ask forNo-battery operation, a built-in 120A–160A MPPT solar charger, and an MPPT window wide enough for your PV string design.
Where utilities or site rules prohibit reverse power flow, the inverter must manage grid interaction safely.
Ask forThe anti-backflow grid connection function, wide AC input range, and confirmation of local grid configuration support.
Off-grid sites are expensive to reach. Remote diagnostics reduce maintenance trips and downtime.
Ask forWiFi/GPRS remote monitoring, LCD+LED status display, optional RS232/485 interfaces, and an operating range suitable for your climate.
Tell us your expected battery voltage, PV array size, load profile, and monitoring requirements. The HET team can help you select the right HP-PV model or discuss customization and OEM/ODM requests.
Keep adjacent product options together for a faster catalog comparison.
Professional-grade HT Series inverter with 99.5% tracking efficiency. Reliable solution for solar pv inverter manufacturers and mppt solar hybrid inverter needs.
View product
Source the HB-PV hybrid inverter for pure sine wave power inverter suppliers. Features 100A MPPT, 96% efficiency, and parallel scalability for global projects.
View product
Tailored manufacturing for the HR Series, a professional off grid solar inverter with lithium storage. A reliable solar inverter manufacturer for bulk supply.
View productthis guide focuses on the hp-pv series 3.6kw-10.2kw off-grid high-frequency hybrid inverter. the official spec table lists het-hp-pv1600w, het-hp-pv2400w, het-hp-pv3600w, het-hp-pv5600w and het-hp-pv10000w.
yes. the official product page states that the inverter runs without battery, which makes it useful for daylight-only pv sites. when a battery is connected, the built-in mppt solar charger manages charging.
the hp-pv specification table lists a transfer time of 10ms in ups/vde4105 mode and 20ms in apl mode. for sensitive residential or small commercial loads, specify ups mode and confirm the selected model’s rated load in your rfq.
yes. the normal battery system voltage is selectable at 24vdc or 48vdc depending on model. confirm floating charge and overcharge protection values from the official specification table for the exact model.
the product page lists ce (iec62109-1,2), en61000-6-1 and en61000-6-3. the faq section states a 2-year warranty covering manufacturing defects. ask the supplier for current certificate copies before ordering.
yes. hp-pv lists wifi/gprs remote monitoring as a feature, with optional rj11/rj45/rs232/485 management. this is important for service teams managing multiple off-grid locations. confirm network provisioning with the supplier.
